Blog
Blog
Industry News
Company News
The application of aerators in water purification
Release time:
2022-12-12 13:38
Aerator Primarily used to treat drinking water to purify tap water. It can retain minerals beneficial to the human body in the water, but it cannot remove alkali and scale from the water.
This water purifier uses aeration filtration technology to separate particles from water through semi-permeable data. Its core component is the filter element. Different models have different filter element combinations, ranging from a single-stage filter to a nine-stage filter. Meanwhile, microfiltration types use filter membranes with pore sizes ranging from 0.02 to 10 microns as the medium for filtering and treating water, which can remove various impurities, rust, sand, odors, residual chlorine, and visible heavy metals in the water. Currently, the most common microfiltration water purifiers on the market use PP cotton filters and activated carbon filters. Their technology is relatively mature and widely used, but they require timely cleaning, with a service life of 3 to 18 months.
In addition, if the quality of the water purifier is not good enough, high-quality water may also be contaminated. Since the basic working principle of a water purifier is to purify water quality through the built-in filter element, the quality of the filter element is directly related to the quality and service life of the water purifier.
There are many types of water purifiers for aerators currently on the market, most of which use multi-stage filter elements. To determine if it is a water purifier, the first thing to consider is whether it uses a reverse osmosis membrane (RO membrane). The pore size of the reverse osmosis membrane is only 0.1 nanometers. This scale can only pass through water molecules and gases dissolved in the water. It can filter out bacteria and most organic matter in the water, and it can remove alkali and scale from the water. The water is very pure, and the taste is indeed better than ordinary water. However, this water purifier requires electricity, and the water output is small, so only 1/3 liter of tap water is filtered for 1 liter.
Ultrafiltration aerators use ultrafiltration membranes or nanofiltration membrane filter elements, which use filter membranes with pore sizes ranging from 0.001 to 0.2 microns as the medium for filtering and treating water, and can remove harmful bacteria, E. coli, etc., from the water.
In ultrafiltration water purifiers, as long as ultrafiltration membrane filter elements are used without PP cotton filter elements and activated carbon filter elements, odors cannot be removed, simple clogging occurs, and the service life of the filter membrane is shortened. It is recommended to use these three filter element types in combination.
Aerator, vortex aerator, microporous aerator
Next page
Practical application of IC tower in food processing wastewater treatment
Wastewater from the food processing industry contains a large amount of organic matter, suspended solids, and oils. Traditional treatment methods often face problems such as high energy consumption and long processing cycles. The IC tower (internal circulation anaerobic reactor), with its unique internal circulation structure and three-phase separation system, demonstrates technical adaptability in treating high-concentration organic wastewater. The core advantage of the IC tower lies in its internal circulation mechanism. Through the fluid movement of the internal rising and falling pipes, it achieves thorough mixing of sludge and wastewater, improving biodegradation efficiency. In food wastewater treatment, the IC tower can adapt to influent conditions with a wide range of COD concentrations, especially suitable for the dairy, meat processing, and brewing industries. Practice has shown that when treating oily wastewater, the IC tower can stably achieve a COD removal rate that meets emission standards by reasonably controlling the hydraulic retention time and organic load. In an actual engineering case, a large seasoning production enterprise used the IC tower as a pretreatment unit. The influent COD concentration ranged from 8000-12000mg/L, and after treatment by the IC tower, it was reduced to below 1500mg/L, significantly reducing the burden on the subsequent aerobic treatment unit. The operating data shows that the biogas yield of the IC tower is stable and can be used for energy recovery, further reducing treatment costs.
The effectiveness of IC tower in treating high-concentration organic wastewater
The IC tower (internal circulation anaerobic reactor) is an important piece of equipment in modern wastewater treatment, demonstrating significant technical characteristics in treating high-concentration organic wastewater. Its unique internal circulation system enhances the contact efficiency between sludge and wastewater, making the organic matter degradation process more thorough and showing clear adaptability in treating industrial wastewater with a COD concentration exceeding 3000 mg/L. The treatment effect of this technology is mainly reflected in two dimensions: organic matter removal rate and biogas production. Actual operating data shows that in wastewater treatment for industries such as brewing and food processing, the IC tower usually maintains a high COD removal rate. The granular sludge formed inside the reactor has good settling performance, ensuring the stability of system operation. When the temperature is controlled around 35℃, the microbial activity reaches an optimal state, and the treatment effect is relatively ideal. In the process of treating high-concentration organic wastewater, the volumetric loading capacity of the IC tower is a key indicator that distinguishes it from traditional anaerobic processes. Due to its multi-stage reaction zone design and internal circulation flow pattern, the equipment can withstand high organic load shocks. Pharmaceutical wastewater treatment cases show that the system can still maintain stable operation when the influent COD fluctuates between 5000-8000 mg/L.
In the back-end process of semiconductor manufacturing, the IC handler (integrated circuit testing and sorting equipment) plays a core role in verifying chip functions and screening for quality. Its working principle is to use a precision robotic arm to send wafers or packaged chips to the testing station, and use the probe card and tester to complete the electrical parameter measurement. Then, according to the test results, it automatically sorts out qualified products and defective products. This integrated "test-judgment-sorting" process makes it a decisive link in the quality control before the chip leaves the factory. From a technical perspective, the gatekeeping role of the IC handler is reflected in three dimensions: First, the contact testing scheme can simulate the actual working state of the chip and detect physical defects such as open circuits, short circuits, and leakage; second, the multi-station parallel testing architecture achieves the screening capacity of thousands of chips per unit time, matching the production capacity needs of the packaging and testing factory; more importantly, its test data is directly related to the yield statistics of the chip, providing key evidence for process improvement. Current mainstream equipment supports environmental temperature testing from -40℃ to 150℃, covering the reliability verification needs of different application scenarios such as consumer electronics and automotive electronics. In industrial practice, the testing standards of IC handlers are often more stringent than the terminal application conditions. Taking the case of a major packaging and testing factory as an example
Contact Information
Address: No. 104, Unit 1, Building 2, Far East Ocean Tide Xuan Center, Tangye Street, Licheng District, Jinan City, Shandong Province
Mobile Website
WeChat Customer Service
Shandong Zhiyuan Environmental Engineering Co., Ltd. Copyright reserved This website supports IPV4&IPV6 dual-way access