Home
About
Company Profile
Corporate Culture
Honors
Product
Anaerobic reactor
Aeration equipment
Dissolved air flotation equipment
Filtering equipment
Sludge scraping equipment
Integrated wastewater treatment equipment
Dust removal, desulfurization and denitrification equipment
VOC odor treatment
Strength
Technical Strength
Environmental engineering design qualification
Engineering contracting qualification
High-tech enterprise
Case
Papermaking wastewater
Chemical fiber wastewater
Other industrial wastewater
High desalination water and reclaimed water reuse
Town sewage treatment
Beautiful countryside sewage
Dust removal, desulfurization, denitrification, and atmospheric governance
VOC volatile organic compound treatment
Garbage leachate treatment
Blog
Company News
Industry News
Contact
CN
What are the advantages of IC cans?
The IC reactor has strong internal circulation, good mass transfer effect, and large biomass. Its volumetric load is much higher than that of ordinary UASB reactors, about 3 times higher. The volume load of the IC reactor is about 3 times higher than that of ordinary UASB reactors, and its footprint is about 1/4-1/3 of that of ordinary UASB reactors, thus reducing the capital investment of the reactor. The IC reactor is not only small in size, but also has a high diameter-to-height ratio, so it occupies a special area and is very suitable for new and expansion projects of factories and mines where land is tight.
11
2020
/
06
Anaerobic tower manufacturers tell you how to buy reactors
Anaerobic tower manufacturers tell you how to buy reactors. As a UASB reactor manufacturer, we naturally hope to buy suitable reactors, which can protect our rights and offer better prices. While ensuring the quality of reactors supplied directly by manufacturers, we can effectively avoid malfunctions and disputes. Therefore, as long as we find suitable manufacturers, we don't have to worry about cooperation. However, when building reactors, we still need to weigh the quotations of different manufacturers to ensure more secure cooperation. Understand the infrastructure costs of different manufacturers on the internet. In fact, we can all find different types of UASB reactor manufacturers online.
28
05
Anaerobic tower manufacturers discuss the application of anaerobic reactors in the environmental protection industry
Anaerobic Tower Manufacturers Discuss the Application of Anaerobic Reactors in the Environmental Protection Industry: Anaerobic reactors are highly efficient, multi-stage internal circulation reactors that can effectively treat wastewater generated from daily life and production, thus finding wide application in the environmental protection industry. Anaerobic Reactor Operating Instructions: Before using anaerobic reactor equipment, water filling tests and airtightness tests must be conducted. Anaerobic sludge is purified with nitrogen before cultivation and domestication. Secondly, it should also be noted that when using an IC anaerobic reactor for mesophilic digestion or thermophilic digestion, the slower the heating rate, the better. At the same time, for wastewater with a high carbohydrate content and a lack of alkaline buffering substances, it is necessary to
26
Introduction to Anaerobic Tower Construction
Anaerobic Tower Construction Introduction: The anaerobic tower is a widely used wastewater treatment device. With its high efficiency and low cost, the anaerobic tower has been widely welcomed in many industries. In anaerobic wastewater treatment, compared to aerobic reactors, the anaerobic tower is a commonly used anaerobic reactor. Its main advantages are low operating costs, low sludge production, stable performance, and recyclable energy. The basic structure of an anaerobic tower mainly consists of a sludge bed, a sludge suspension layer, a sedimentation zone, and a three-phase separator. Sludge Bed The sludge bed is located at the bottom of the entire anaerobic reactor, and its volume generally accounts for about 30% of the entire anaerobic reactor volume, but it is crucial for the anaerobic reaction.
25
How should an anaerobic tower be cleaned?
How to clean an anaerobic tower: An anaerobic tower is a widely used wastewater treatment device with advantages of low cost and high efficiency. Under certain hydraulic conditions, the anaerobic tower effectively utilizes the coagulation and solidification effects of anaerobic bacteria to form granular sludge. These high-concentration granular sludge have a large specific surface area and high activity. These granular activated sludge complete the treatment of organic matter. The particle size of granular sludge is generally 0.5-3mm, and the sludge concentration can be as high as 20-60g/m3, enabling the equipment to achieve high treatment efficiency, and the COD dissolved load of organic wastewater can be as high as 10-25kg/m3·d. Components of the anaerobic tower
22